Pixel drift

From SGMK-SSAM-WIKI
Revision as of 16:10, 25 December 2020 by Omega attraktor (talk | contribs)
Jump to navigation Jump to search

Concept

Multiple LEDs with different colors and positions produce colored shadows. With red green and blue LEDs this results in a nice visual effect. For best effects use bright "Superflux" LEDs with a wide beam angle. The pixel drift was first built in workshops during the MFRU festival 2016 in Maribor.

Visuals

Parts

  • Superflux LEDs 5mm] red, green, blue
  • Resistors
  • Battery & connector

Resistor values

Depending on supply voltage, e.g. with 9V:

  • 330 Ohm for red LED -> 22.7 mA current through the LED
  • 270 Ohm for green LED -> 22.7 mA current through the LED
  • 270 Ohm for blue LED -> 22.9 mA current through the LED

Board

File:Pixel drift 6x.pdf

rC3 Edition

Board for etching


Built devices

Activate your card here

Retrieved from "http://wiki.sgmk-ssam.ch/index.php?title=Pixel_drift&oldid=9378"