Pixel drift: Difference between revisions
Jump to navigation
Jump to search
m (→rC3 Edition) |
|||
| Line 33: | Line 33: | ||
[[File:pixel_drift_rC3.png|480px]] | [[File:pixel_drift_rC3.png|480px]] | ||
You can also use | You can also use standard LED without a PCB making the connections with the parts: | ||
[[File:pixeldrift_standard_LED.png|480px]] | [[File:pixeldrift_standard_LED.png|480px]] | ||
Revision as of 17:45, 25 December 2020
Concept
Multiple LEDs with different colors and positions produce colored shadows. With red green and blue LEDs this results in a nice visual effect. For best effects use bright "Superflux" LEDs with a wide beam angle. The pixel drift was first built in workshops during the MFRU festival 2016 in Maribor.
Visuals
Parts
- Superflux LEDs 5mm] red, green, blue
- Resistors
- Battery & connector
Resistor values
Depending on supply voltage, e.g. with 9V:
- 330 Ohm for red LED -> 22.7 mA current through the LED
- 270 Ohm for green LED -> 22.7 mA current through the LED
- 270 Ohm for blue LED -> 22.9 mA current through the LED
Board
rC3 Edition
Board for 5mm Superflux LED
You can also use standard LED without a PCB making the connections with the parts:
Built devices
Activate your card here
