Projects

quadnammotorbulator

Made by pin and zundar during Electric Wonderland 2022

based on Attiny85 record + play by Ralf Schreiber: http://www.ralfschreiber.com/share/pulseandpatterns.html

Gcode 2d-plotter

Based on GCodeToAnalog board by GaudiLabs: https://github.com/GaudiLabs/GCodeToAnalog

Volx Micro Mechanic Macintosh Monitor

Photos H3K

IoT Clock

That blinky thing hanging over the door now.

The web app to control it: https://iot-clock2.appspot.com/

Arduino Uno R3 as HID

Turning the Arduino UNO R3 into a HID is very easy. But the documentation on the web just sucks. Get the recipe here at SGMK.

Elektronisches Heimatwerk Luzern 28.2.-10.3.2013

The Gnusbuino is an adaption of Michael Egger's gnusb that is (more or less) compatible with the Arduino environment. It uses the V-USB virtual USB driver from obdev.at instead of a dedicated USB chip (FTDI on the Arduino) - is thus a lot easier and cheaper to build oneself - very few components, single sided PCB… It has a bootloader and can programmed directly through USB. It can mimic many devices (like the USBasp AVR programmer or a standard USB-MIDI interface).

Offspring:

Midignusbuino - Arduino compatible USB-MIDI controller / interface
Babygnusbuino - ridiculously small bare-bones Arduino
Gnusbuino88 Atmega88 version
Babygnusbuino-v2 - more free pins on already ridiculously small bare-bones Arduino
Babymidimultiplexgnusbuino - 8 channel MIDI controller
8bit Mix Tape

Postduino and related Fantasies

Discussions at the anyma research week 2014, after hours and hours of discussions, late night fights and yelling, nightmares and fantasies about what comes after the arduino.... cheap, simple, easy to make? or next level shit using arm-processors? more pins / less pins? fuck attiny85 forever? what about the 32u4 chip? or just buy the arduino micro? or should we just use the Gnusbuino, as we always had? or what about that Atmega88 chip? or, or, or, or,...

8bit Mix Tape

The 8bit MixTape is an arduino compatible sound gadget, based on the BabyGnusbuino (anyma) and Viznut's "Algorithmic symphonies from one line of code", put together by dusjagr, ucok and iyok...

New version, v0.2, nicely fits into a tape, with battery, USB programming interface, LEDs and a button to choose different codes.

links: http://youtube.com/watch?v=GtQdIYUtAHg http://wurstcaptures.untergrund.net/music/ http://wiki.sgmk-ssam.ch/index.php/Babygnusbuino

DIY Micro Laser Cutter

Step by Step Instruction for building your DIY Laser Cutter.

little cutie code snippets

tone sweep arduino combine with a maotor driver or mosfet for speakers + maizena

20_pix display

Vive la Resistance aka NanoSmano Sajica

Shruti Hacking - Radel Nano Dx

Instruction on how to digitally hack the legendary Indian musical instruments by Radel. Radel Electronics Pvt. Ltd. is the pioneer in the field of electronic musical instruments for Indian music.

microRing

The Idea is to generate two squarewaves with two NAND-Gatters of a 4093 IC and use the other two NAND as an XOR stage. The two waveforms are then send as inputs to the XOR and we have a Ring Modulation. Best of it, it's all on just one 4093. The additional parts are also very easy.

Masken

BitBadge

File:BitBadge 2014.pdf

Bits&Bytes

processingDataDDisplay