8bit Mix Tape
Overview
The 8bit MixTape is an arduino compatible sound gadget, based on the Babygnusbuino (anyma) and Viznut's "Algorithmic symphonies from one line of code", put together by dusjagr, ucok and iyok...
Prototypes
v0.1
{{#widget:Vimeo|id=58727965}}
First version using a BabyGnusbuino attached to a card-board tape dummy
v0.2
{{#widget:Vimeo|id=58831051}}
New version, v0.2, nicely fits into a tape, with battery, USB programming interface, LEDs and a button to choose different codes.
v0.3
based on Babygnusbuino-v2
{{#widget:Vimeo|id=58831051}}
v0.4
for on board soldering
prototype PCB to fit into a tape
v0.5
now only on a PCB pseudo-smd... naaaiiice
{{#widget:Vimeo|id=75647634}}
v0.5 zagreb edition
{{#widget:Vimeo|id=76804911}}
v0.6 lifepatch edition
Iyok is working on a simple programming interface, multiplatform, test the tunes on your computer, press upload and the baby is detected and whhoooosh, there you go!
we try to only rely on parts we can get in the local electronics store... which are nice and you can smoke inside!
{{#widget:YouTube|id=OP4KCHzHKuA}}
example codes
8-bit MixTape with button baby2
/* PCrazy shit 8-bit symphony generator */
/* */
/*
* inspired by:
* http://countercomplex.blogspot.com/2011/10/algorithmic-symphonies-from-one-line-of.html
*/
int speakerPin = 0;
//int laserPin = 0;
int buttonPin = 1;
int potiPin3 = 2;
int potiPin4 = 4;
int buttonState = 0;
int lastButtonState = 0;
int count = 0;
unsigned long int pulseWidthOFF = 0;
unsigned long int pulseWidthON = 0;
unsigned long int pulseWidthPart = 0;
int samplingDelay;
unsigned long int reg;
long t = 0;
int v = 0;
unsigned int c3 = 0;
unsigned int c4 = 4;
unsigned int analogValue;
void setup () {
TCCR0B = TCCR0B & 0b11111001;
pinMode (speakerPin, OUTPUT);
pinMode(buttonPin, INPUT);
digitalWrite(buttonPin, HIGH);
pinMode (potiPin3, INPUT);
pinMode (potiPin4, INPUT);
reg = 0x551155aaL;
}
void loop () {
// read the state of the switch into a local variable:
buttonState = digitalRead(buttonPin);
if (buttonState != lastButtonState && buttonState == HIGH) {
// if the state has changed, increment the counter
count++;
t = 0;
delay(10000);
if (count > 5) {
count = 0;
}
}
lastButtonState = buttonState;
//count = 2;
switch(count) {
case 0: // a classic
c4 = ((analogRead(potiPin4)>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = (t*(t>>8|t>>4))>>(t>>c4);
analogWrite (speakerPin, v);
delayMicroseconds(c3>>2);
t++;
break;
case 1: // ding dong
c4 = ((1023-(analogRead(potiPin4))>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = t * ((t>>15|t>>c4)&83&t>>(c4>>3));
digitalWrite (speakerPin, v);
delayMicroseconds(c3<<2);
t++;
break;
case 2: // experimental 8 bit
c4 = ((1023-(analogRead(potiPin4))>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = t * ((t>>15|t>>c4)&83&t>>(c4>>3));
analogWrite (speakerPin, v);
delayMicroseconds(c3);
t++;
break;
case 3: // PWM modulation
c3 = (analogRead(potiPin3));
c4 = (analogRead(potiPin4) + 1);
pulseWidthPart++;
pulseWidthON = (c3 * pulseWidthPart / 255);
pulseWidthOFF = (c3 - pulseWidthON);
digitalWrite(speakerPin, HIGH);
delay(pulseWidthOFF);
digitalWrite(speakerPin, LOW);
delay(pulseWidthON);
if (pulseWidthPart == 255) {
pulseWidthPart = 254 - (c4>>3);
}
break;
case 4: //white noise
unsigned long int newr;
unsigned char lobit;
unsigned char b31, b29, b25, b24;
b31 = (reg & (1L << 31)) >> 31;
b29 = (reg & (1L << 29)) >> 29;
b25 = (reg & (1L << 25)) >> 25;
b24 = (reg & (1L << 24)) >> 24;
lobit = b31 ^ b29 ^ b25 ^ b24;
newr = (reg << 1) | lobit;
reg = newr;
digitalWrite (speakerPin, reg & 1);
samplingDelay = 1 + (2*(analogRead(potiPin3)>>0));
delayMicroseconds (samplingDelay);
break;
}
}
What needs to be done
- make a cool video
- test the read/write head
- define size and specifics of parts (small potentiometers anyone?)
- design a PCB
- make more cool songs
Schematics
see Babygnusbuino for the USB / attiny85 stuff
New pin definitions file: File:Pins arduino.h.zip put in ./sketchbook/hardware/Gnusbuino/variants/attiny85
// ATMEL ATTINY85 / BABYGNUSBUINO // // +---\/---+ // !RESET (AD 0) PB5 1| |8 VCC // (D3/A3)PWM? PB3 2| |7 PB2 / USB+ // (D4/A2)PWM? PB4 3| |6 PB1 / USB- / PWM? // GND 4| |5 PB0 / D0 / PWM // +--------+ //
- add 2 potentiometers on PB3 and PB4 (that's the pin 2 and pin 3 on the chip)
- add 1 button to PB2 (pin 7), on press to 5V - maybe needs to be optimized and debounced
- add speaker and mini-jack to PB0 (pin 5) and GND
- add batteries incl. a on/off switch to VCC / GND
- add 1 power indicator LED from VCC to ground after the switch
- add 1 LED parallel to the speaker
- optional - add a laser!
Parts
Babygnusbuino Parts:
- 1 Atmel Attiny85 microprocessor (maybe u want to use a IC-socket)
- 2 resistors 68 Ohms
- 2 zeners 3.3V
- 1 resistor 1k6
- 1 capacitor 100n
8bit MixTape:
- 1 potentiometer 20kOhm lin
- 1 potentiometer 10kOhm log
- 1 bushbutton (the flat ones that fit on a breadboard)
- 1 mini Jack with switch, 3.5mm (mono in v0.2, stereo comes later)
- 2 LEDs (smd or 5mm), including resistors as wished
- 1 mini-speaker
- 2 CR2032 batteries
- 2 clips for batteries
- 1 switch on/off
- 1 mini-USB connector (u can also make your own USB cable, scavenging or get a USB plug)
- (1 capacitor, 0.1 - 1µF for low-pass filter if needed)
- (1 read/write head for magnetic tape)
Links
One Liners
http://youtube.com/watch?v=GtQdIYUtAHg
http://wurstcaptures.untergrund.net/music/
http://countercomplex.blogspot.com/2011/10/some-deep-analysis-of-one-line-music.html
http://wiki.sgmk-ssam.ch/index.php/Babygnusbuino
other sound projects with arduino / attiny
http://code.google.com/p/tinkerit/wiki/Auduino
http://www.standuino.eu/musical-instruments/2pi-whitenoise/
http://www.bastl-instruments.com/instruments/trinity/drum/
http://sensorium.github.io/Mozzi/examples/
https://github.com/fakebitpolytechnic/cheapsynth
Code
Basic
/* PCrazy shit 8-bit symphony generator
inspired by:
http://countercomplex.blogspot.com/2011/10/algorithmic-symphonies-from-one-line-of.html
*/
int speakerPin = 0;
int potiPin3 = A3;
int potiPin4 = A2;
long t = 0;
int v = 0;
int c3 = 0;
int c4 = 0;
void setup () {
TCCR0B = TCCR0B & 0b11111001; //no timer pre-scaler, fast PWM
pinMode (speakerPin, OUTPUT);
pinMode (potiPin3, INPUT);
pinMode (potiPin4, INPUT);
}
void loop ()
{
c4 = ((analogRead(potiPin4)>>5) + 0);
c3 = (analogRead(potiPin3)>>0);
v = (t*(t>>8|t>>4))>>(t>>c4);
analogWrite (speakerPin, v);
delayMicroseconds(c3>>3);
t++;
}
8bit MixTape with button selector
/* Crazy shit 8-bit symphony generator */
/* */
/*
* inspired by:
* http://countercomplex.blogspot.com/2011/10/algorithmic-symphonies-from-one-line-of.html
*/
int speakerPin = 0;
int buttonPin = 2;
int potiPin3 = A3;
int potiPin4 = A2;
int buttonState = 0;
int lastButtonState = 0;
int count = 0;
unsigned long int pulseWidthOFF = 0;
unsigned long int pulseWidthON = 0;
unsigned long int pulseWidthPart = 0;
int samplingDelay;
unsigned long int reg;
long t = 0;
int v = 0;
unsigned int c3 = 0;
unsigned int c4 = 0;
unsigned int analogValue;
void setup () {
TCCR0B = TCCR0B & 0b11111001;
pinMode (speakerPin, OUTPUT);
pinMode(buttonPin, INPUT);
pinMode (potiPin3, INPUT);
pinMode (potiPin4, INPUT);
reg = 0x551155aaL;
}
void loop () {
// read the state of the switch into a local variable:
buttonState = digitalRead(buttonPin);
if (buttonState != lastButtonState && buttonState == HIGH) {
// if the state has changed, increment the counter
count++;
t = 0;
delay(10000);
if (count > 5) {
count = 0;
}
}
lastButtonState = buttonState;
switch(count) {
case 0: // a classic
c4 = ((analogRead(potiPin4)>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = (t*(t>>8|t>>4))>>(t>>c4);
analogWrite (speakerPin, v);
delayMicroseconds(c3>>2);
t++;
break;
case 1: // ding dong
c4 = ((1023-(analogRead(potiPin4))>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = t * ((t>>15|t>>c4)&83&t>>(c4>>3));
digitalWrite (speakerPin, v);
delayMicroseconds(c3<<2);
t++;
break;
case 2: // experimental 8 bit
c4 = ((1023-(analogRead(potiPin4))>>6) + 1);
c3 = (analogRead(potiPin3)>>0);
v = t * ((t>>15|t>>c4)&83&t>>(c4>>3));
analogWrite (speakerPin, v);
delayMicroseconds(c3);
t++;
break;
case 3: // PWM modulation
c3 = (analogRead(potiPin3));
c4 = (analogRead(potiPin4) + 1);
pulseWidthPart++;
pulseWidthON = (c3 * pulseWidthPart / 255);
pulseWidthOFF = (c3 - pulseWidthON);
digitalWrite(speakerPin, HIGH);
delay(pulseWidthOFF);
digitalWrite(speakerPin, LOW);
delay(pulseWidthON);
if (pulseWidthPart == 255) {
pulseWidthPart = 254 - (c4>>3);
}
break;
case 4: //white noise
unsigned long int newr;
unsigned char lobit;
unsigned char b31, b29, b25, b24;
b31 = (reg & (1L << 31)) >> 31;
b29 = (reg & (1L << 29)) >> 29;
b25 = (reg & (1L << 25)) >> 25;
b24 = (reg & (1L << 24)) >> 24;
lobit = b31 ^ b29 ^ b25 ^ b24;
newr = (reg << 1) | lobit;
reg = newr;
digitalWrite (speakerPin, reg & 1);
samplingDelay = 1 + (2*(analogRead(potiPin3)>>0));
delayMicroseconds (samplingDelay);
break;
}
}
8bit MixTape lifepatch
see budi's github
8bit Mix Tape Advanced
Prototype using the Seeeduino 328, more pots, easier to program
/* PCrazy shit 8-bit symphony generator */
/* */
/*
* inspired by:
* http://countercomplex.blogspot.com/2011/10/algorithmic-symphonies-from-one-line-of.html
*
* http://wurstcaptures.untergrund.net/music/
*
*/
int speakerPin = 10;
int speakerPin2 = 11;
int buttonPin = 2;
int pot0 = 0;
int pot1 = 1;
int pot2 = 2;
int pot3 = 3;
long t = 0;
unsigned int p0 = 10;
unsigned int p1 = 4;
unsigned int p2 = 4;
unsigned int delta_T = 4;
int v = 0;
void setup () {
TCCR0B = TCCR0B & 0b11111001; //no timer pre-scaler, fast PWM
pinMode (speakerPin, OUTPUT);
pinMode (speakerPin2, OUTPUT);
pinMode(buttonPin, INPUT);
digitalWrite(buttonPin, HIGH);
pinMode (pot0, INPUT);
pinMode (pot1, INPUT);
pinMode (pot2, INPUT);
pinMode (pot3, INPUT);
}
void loop ()
{
//p0 = (analogRead(pot0)>>3);
p1 = (analogRead(pot1)>>7);
p2 = (analogRead(pot2)>>7);
delta_T = (analogRead(pot3)>>0);
//v = t * ((t>>15|t>>7)&p1&t>>(p2>>3));
//v = t * ((t>>p1|t>>3)&17&t>>9);
//v = (t|p1) * ((t>>p2|t>>11)&47&t>>3);
//v = t>>4&1?t>>5:-t>>p1 ;
v = (t|3) * ((t>>1|t>>p1)&47&t>>p2);
//v = t*t/p1;
analogWrite (speakerPin, v);
digitalWrite (speakerPin2, v);
delayMicroseconds(delta_T);
t++;
}
8bit MixTape Pro Advanced 2000 LCD-version cartridge
{{#widget:Vimeo|id=101866392}}
Advanced Mini LCD code
Check it on dusjagr's GitHub
git clone https://github.com/dusjagr/8bit_MixTape_advanced-2000
Advanced Mini VideoOut edition
Coming soon...