Krabbenarm
Krabbenarm - Base
Material
- 12 lasercut wood parts: File:Krabbenarm-Laser.dxf
- 6 wood balls (20mm diameter)
- 4 dowels 6 x 30mm
- 3 screws M5 x 30
- 3 wing nuts M5
- 40cm teflon tube 4mm diameter
- neodym magnet 15 x 3mm
Assembly
- Drill 6mm holes ca 8mm into one side of each ball and glue dowels:
- Glue toolholder with epoxy (Araldite...): ball, dowel, tubeholder, magnet