Ender3

From SGMK-SSAM-WIKI
Revision as of 11:25, 11 April 2019 by Dusjagr (talk | contribs)
Jump to navigation Jump to search

Slice yourself using CURA

Print from microSD card

Connect via OctoPrint

Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).

Choose Port:

  • /dev/ttyUSB0 for Ender3
  • /dev/ttyACM0 for MicroDelta aka RandeDelta

Choose Profile:

  • Neue Ender Siech im MechArtLab
  • RandeDelta

Connect

upload gcode

To Do:

Upload to SD card notworking

Slice on OctoPrint (experimental)

Retrieved from "http://wiki.sgmk-ssam.ch/index.php?title=Ender3&oldid=7703"