Ender3: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| Line 1: | Line 1: | ||
== Slice yourself using CURA == | |||
== Print from microSD card == | |||
== Connect via OctoPrint == | == Connect via OctoPrint == | ||
Installed on OctoPrint. | Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/ | ||
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard). | |||
Choose Port: | |||
* /dev/ttyUSB0 for Ender3 | |||
* /dev/ttyACM0 for [[MicroDelta]] aka RandeDelta | |||
Choose Profile: | |||
* Neue Ender Siech im MechArtLab | |||
* RandeDelta | |||
'''Connect''' | |||
=== upload gcode === | |||
To Do: | |||
Upload to SD card notworking | |||
== | === Slice on OctoPrint (experimental) === | ||
Revision as of 11:25, 11 April 2019
Slice yourself using CURA
Print from microSD card
Connect via OctoPrint
Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).
Choose Port:
- /dev/ttyUSB0 for Ender3
- /dev/ttyACM0 for MicroDelta aka RandeDelta
Choose Profile:
- Neue Ender Siech im MechArtLab
- RandeDelta
Connect
upload gcode
To Do:
Upload to SD card notworking