MicroDelta: Difference between revisions

Revision as of 19:32, 22 December 2018

Use octoprint web interface to 3d print.

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)

Octoprint system administration: connect with ssh to the pi (same ip as websinterface) with pi/raspberry

Revision as of 19:30, 22 December 2018 (view source) Stahl (talk \| contribs) No edit summary ← Older edit		Revision as of 19:32, 22 December 2018 (view source) Stahl (talk \| contribs) No edit summary Newer edit →
Line 1:		Line 1:
	Use octoprint [http://192.168.1.38\|web interface] to 3d print.		Use octoprint [http://192.168.1.38 web interface] to 3d print.

	Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)		Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)