Krabbenarm: Difference between revisions
Jump to navigation
Jump to search
| Line 1: | Line 1: | ||
==Krabbenarm - Base== | ==Krabbenarm - Base== | ||
Sketchup Model: [[File:Krabbenarm20200803.zip]] | ===Downloads=== | ||
Sketchup Model (SKP): [[File:Krabbenarm20200803.zip]] | |||
Laser Cut File (DXF) [[File:Krabbenarm-Laser.dxf]] | |||
===Material=== | ===Material=== | ||
* 12 lasercut wood parts | * 12 lasercut wood parts | ||
* 6 wood balls (20mm diameter) | * 6 wood balls (20mm diameter) | ||
* 4 dowels 6 x 30mm | * 4 dowels 6 x 30mm | ||
Revision as of 11:09, 3 August 2020
Krabbenarm - Base
Downloads
Sketchup Model (SKP): File:Krabbenarm20200803.zip Laser Cut File (DXF) File:Krabbenarm-Laser.dxf
Material
- 12 lasercut wood parts
- 6 wood balls (20mm diameter)
- 4 dowels 6 x 30mm
- 3 screws M5 x 30
- 3 wing nuts M5
- 40cm teflon tube 4mm diameter
- neodym magnet 15 x 3mm
Assembly
- Drill 6mm holes ca 8mm into one side of each ball and glue dowels:
- Glue toolholder with epoxy (Araldite...): ball, dowel, tubeholder, magnet: south pole facing outwards
[[File:KrabbenarmToolholder|300px]
- Glue base plate
- Sand all wooden parts, spray paint at will
- Screw moving segments together loosely
- Push Solder through hole in base and through teflon tube
- Assemble all parts
