PCB tinning: Difference between revisions
mNo edit summary |
mNo edit summary |
||
| Line 2: | Line 2: | ||
This is a simple (acid bath) method for tinning your DIY PCBs. The tin layer prevents the copper from oxidising | This is a simple (acid bath) method for tinning your DIY PCBs. The tin layer prevents the copper from oxidising and it also looks quite nice. | ||
[[File:pcb_before_and_after_tinning.JPG|400px]] | [[File:pcb_before_and_after_tinning.JPG|400px]] | ||
| Line 10: | Line 10: | ||
* Thiourea (Thioharnstoff) – 12,5 grams | * Thiourea (Thioharnstoff) – 12,5 grams | ||
* Tartaric acid (Weinsäure) – 8,8 grams | * Tartaric acid (Weinsäure) – 8,8 grams | ||
* Tin(II) chloride (Zinn(II)chlorid) – 1,3 gram | * Tin(II) chloride (Zinn(II)-chlorid) – 1,3 gram | ||
* Tap water – up to 250 ml | * Tap water – up to 250 ml | ||
Latest revision as of 23:07, 3 April 2019
This is a simple (acid bath) method for tinning your DIY PCBs. The tin layer prevents the copper from oxidising and it also looks quite nice.
Materials
- Thiourea (Thioharnstoff) – 12,5 grams
- Tartaric acid (Weinsäure) – 8,8 grams
- Tin(II) chloride (Zinn(II)-chlorid) – 1,3 gram
- Tap water – up to 250 ml
You can get the chemicals in a chemist's shop, a good source is Gehrig, Lucerne: http://www.gehrig-ag.ch/content/index.php/werkstoffe/chemikalien
Tools
- Beaker or flask (graduated) to mix the ingredients
- Small weighing scale
- A magnetic stirrer is handy...
- Tray (tupper)
How to
The substances are irritating, use gloves.
- Pour water in the beaker
- Weigh and add the chemicals one by one while stirring
- When everything has dissolved, pour the solution in the tray
Clean the PCB before tinning. Remove any oxide on the copper using a soft abrasive sponge or polishing paste.
Leave the PCB in the solution for a few minutes. The longer, the thicker the tin layer will become.
Rinse and dry.
Dispose of the solution properly.
Credits
The idea for this came from Jo Grys (frgmnt) in Berlin. He uses this method and provided a link to Robert Gawron's article: https://robertgawron.blogspot.com/2016/04/galvanic-pcb-tinning-by-using-home-made.html