MicroDelta: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
| (One intermediate revision by one other user not shown) | |||
| Line 1: | Line 1: | ||
Use octoprint [http://192.168.1.38 | |||
== The old school way.... == | |||
Check here: https://reprap.org/wiki/Micro_Delta | |||
Go to their githun from 2014: https://github.com/eMotion-Tech/uDelta | |||
Download the old repetier version the packaged. | |||
== With Octoprint == | |||
Use octoprint [http://192.168.1.38 web interface] to 3d print. | |||
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard) | Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard) | ||
Latest revision as of 16:36, 31 October 2021
The old school way....
Check here: https://reprap.org/wiki/Micro_Delta
Go to their githun from 2014: https://github.com/eMotion-Tech/uDelta
Download the old repetier version the packaged.
With Octoprint
Use octoprint web interface to 3d print.
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)
Octoprint system administration: connect with ssh to the pi (same ip as websinterface) with pi/raspberry
