Babygnusbuino - Revision history

Dusjagr: /* Flashing the bootloader */

2013-09-27T15:23:14Z

Flashing the bootloader

← Older revision		Revision as of 17:23, 27 September 2013
Line 141:		Line 141:

	Fuses:		Fuses:
			new: avrdude -P /dev/ttyUSB0 -b 19200 -c avrisp -p t85 -U lfuse:w:0xe1:m -U efuse:w:0xfe:m -U hfuse:w:0x5d:m
	avrdude -P /dev/ttyUSB0 -b 19200 -c avrisp -p t85 -U lfuse:w:0xe1:m -U hfuse:w:0xdd:m -U efuse:w:0xfe:m		old: avrdude -P /dev/ttyUSB0 -b 19200 -c avrisp -p t85 -U lfuse:w:0xe1:m -U hfuse:w:0xdd:m -U efuse:w:0xfe:m

	maybe change the devices on your OS		maybe change the devices on your OS

2013-09-27T15:00:10Z

Flashing the bootloader

← Older revision		Revision as of 17:00, 27 September 2013
Line 138:		Line 138:
	Bootloader:		Bootloader:

	avrdude -P /dev/ttyUSB0-b 19200 -c avrisp -p t85 -U flash:w:attiny85.hex:i		avrdude -P /dev/ttyUSB0 -b 19200 -c avrisp -p t85 -U flash:w:attiny85.hex:i

	Fuses:		Fuses:

2013-05-13T00:48:58Z

← Older revision		Revision as of 02:48, 13 May 2013
Line 1:		Line 1:
			THERE's a '''NEW VERSION''' with more free pins n stuff ! Visit [[Babygnusbuino-v2]]

	[[File:Babygnusbuino.jpg\|640px]]		[[File:Babygnusbuino.jpg\|640px]]

2013-05-13T00:47:46Z

Experimental: Babygnusbuino v.2.0

← Older revision		Revision as of 02:47, 13 May 2013
Line 378:		Line 378:
	== Experimental: Babygnusbuino v.2.0 ==		== Experimental: Babygnusbuino v.2.0 ==

	[Babygnusbuino-v2 Version 2.0] frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come		[[Babygnusbuino-v2\|Version 2.0]] frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come

	Github repository: https://github.com/mirdej/babygnusbuino		Github repository: https://github.com/mirdej/babygnusbuino

2013-05-13T00:47:06Z

Experimental: [Babygnusbuino-v2 Babygnusbuino v.2.0]

← Older revision		Revision as of 02:47, 13 May 2013
Line 376:		Line 376:
	[[BabyGnusbuino code examples]]		[[BabyGnusbuino code examples]]

	== Experimental: ~~[Babygnusbuino-v2~~ Babygnusbuino v.2.0] ==		== Experimental: Babygnusbuino v.2.0 ==

	Version 2.0 frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come		[Babygnusbuino-v2 Version 2.0] frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come

	Github repository: https://github.com/mirdej/babygnusbuino		Github repository: https://github.com/mirdej/babygnusbuino

2013-05-13T00:46:24Z

Experimental: Babygnusbuino v.2.0

← Older revision		Revision as of 02:46, 13 May 2013
Line 376:		Line 376:
	[[BabyGnusbuino code examples]]		[[BabyGnusbuino code examples]]

	== Experimental: Babygnusbuino v.2.0 ==		== Experimental: [Babygnusbuino-v2 Babygnusbuino v.2.0] ==

	Version 2.0 frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come		Version 2.0 frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come

	Github repository: https://github.com/mirdej/babygnusbuino		Github repository: https://github.com/mirdej/babygnusbuino

2013-05-12T14:34:42Z

Building / Installing

← Older revision		Revision as of 16:34, 12 May 2013
Line 109:		Line 109:

	===Building / Installing===		===Building / Installing===
	Hardware schematics and source code are in the SV repository at http://gnusb.svn.sourceforge.net/viewvc/gnusb/branches/gnusbuino/		Hardware schematics and source code are in the SVN repository at http://gnusb.svn.sourceforge.net/viewvc/gnusb/branches/gnusbuino/

	You can either download the two folders and add their contents to the corresponding folders in your Arduino working directory, or you can pull the latest version directly through svn.		You can either download the two folders and add their contents to the corresponding folders in your Arduino working directory, or you can pull the latest version directly through svn.

2013-05-11T10:28:29Z

← Older revision		Revision as of 12:28, 11 May 2013
Line 375:		Line 375:

	[[BabyGnusbuino code examples]]		[[BabyGnusbuino code examples]]

			== Experimental: Babygnusbuino v.2.0 ==

			Version 2.0 frees up RESET pin, uses PB5 (Reset) and PB3 for USB. Three Hardware PWMs. more to come

			Github repository: https://github.com/mirdej/babygnusbuino

2013-04-27T14:15:48Z

Ideas

← Older revision		Revision as of 16:15, 27 April 2013
Line 250:		Line 250:
	* set the usb pins as outputs and turn all them off at the end of the bootloader.		* set the usb pins as outputs and turn all them off at the end of the bootloader.
	* implement the servo library http://www.cunningturtle.com/attiny4585-servo-library/		* implement the servo library http://www.cunningturtle.com/attiny4585-servo-library/
			* what about a sound I/O port

	== other stuff ==		== other stuff ==

2013-04-19T00:12:20Z

PCB

← Older revision		Revision as of 02:12, 19 April 2013
Line 100:		Line 100:

	[[File:BabyOD_v9_general.jpg\|480px]]		[[File:BabyOD_v9_general.jpg\|480px]]

			'''Mask v2.0:''' [[File:BabyOD_v9_general.pdf]]

	==Programming==		==Programming==