Projects
Elektronisches Heimatwerk Luzern 28.2.-10.3.2013
WatchOut
SGMKmorseAttack
CyberDudelsack
SGMKtiny
SGMKduino
Gnusbuino
The Gnusbuino is an adaption of Michael Egger's gnusb that is (more or less) compatible with the Arduino environment. It uses the V-USB virtual USB driver from obdev.at instead of a dedicated USB chip (FTDI on the Arduino) - is thus a lot easier and cheaper to build oneself - very few components, single sided PCB… It has a bootloader and can programmed directly through USB. It can mimic many devices (like the USBasp AVR programmer or a standard USB-MIDI interface).
Offspring:
- Midignusbuino - Arduino compatible USB-MIDI controller / interface
- Babygnusbuino - ridiculously small bare-bones Arduino
DIY Micro Laser Cutter
Step by Step Instruction for building your DIY Laser Cutter.
little cutie code snippets
- tone sweep arduino combine with a maotor driver or mosfet for speakers + maizena
20_pix display
{{#widget:Vimeo|id=10895002}}
Vive la Resistance aka NanoSmano Sajica
Shruti Hacking - Radel Nano Dx
Instruction on how to digitally hack the legendary Indian musical instruments by Radel. Radel Electronics Pvt. Ltd. is the pioneer in the field of electronic musical instruments for Indian music.
