MicroDelta: Difference between revisions

Revision as of 19:30, 22 December 2018

Use octoprint interface to 3d print.

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)

Octoprint system administration: connect with ssh to the pi (same ip as websinterface) with pi/raspberry

@@ Line 1: / Line 1: @@
-[[File:IMG_0083.jpg]]
 Use octoprint [http://192.168.1.38|web interface] to 3d print.
 Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard)
-Administration: ssh to the pi with pi/raspberry
+Octoprint system administration: connect with ssh to the pi (same ip as websinterface) with pi/raspberry
+[https://octoprint.org/|Octoprint project]
+[[File:IMG_0083.jpg|350px]]