MechArtLab Infrastructure

Revision as of 18:52, 24 July 2021 by Dusjagr (Talk | contribs) (3D Printers Tools and Instructions)

Jump to: navigation, search

Electronic Tools

Mechartlab e-tools.JPG

Hardware Tools

Mechartlab h-tools.JPG

3D Printers Tools and Instructions

Best to directly connect to OctoPrint: http://octopi.local/ or install Cura on your laptop and use the SD cards reader.

UltimakerMicroDeltaEnder3Ender3 v2
8870471861 c28d68fa6d.jpg IMG 0083.jpg Ender3 MechArtLab.jpg Ender3 v2.jpg

Bed leveling for Ender 3 (& V2)

Check this movie:

Ohter resources

Currently a MicroDelta printer is installed, use the page linked to get started.

Design: Download Sketchup from => Design => Export .STL

Slice: Download Cura from => Load .STL => Prepare => Write .GCODE to SD card

Print: Insert SD card into Ultimaker => Push, Scroll to Card => Select .GCODE => Push

Share: Upload model and .STL (but not .GCODE) to

First time? Ask @tamberg.

Parts'n'Stuff / Private Storage

Mechartlab parts.JPG

Lab tools / Wetware

Mechartlab lab-tools.jpg

PCB Etching

Instructions on how to use the PCB etching facility can be found under PCB Etching.

Instructions for Mask design and print for custom PCBs.

Oven for Reflow and PDMS

There is a temperature sensor in the oven connected to an arduino that can be read through serial terminal. At the moment the sensor is mounted at the wrong position and shows around 40° less than the real temperature in the moddle of the oven. more about the code and connection of the temperature sensor is documented.

Instructions for reflow soldering.

Instructions for PDMS bioelectronix.

Lasercutter for PCB stencils


There's a Library in the OpenLab. login is 'SGMK' combined with our beloved password...


Comic on soldering File:FullSolderComic EN.pdf PDF booklet. by Andie Nordgren link title

Office / Public Station

Mechartlab office.jpg IMG 0082.jpg

Chill out / Coffee

Mechartlab chillout.jpg