3D Printers Tools and Instructions
Best to directly connect to OctoPrint: http://octopi.local/ or install Cura on your laptop and use the SD cards reader.
Currently a MicroDelta printer is installed, use the page linked to get started.
Design: Download Sketchup from http://www.sketchup.com/ => Design => Export .STL
Slice: Download Cura from http://software.ultimaker.com/ => Load .STL => Prepare => Write .GCODE to SD card
Print: Insert SD card into Ultimaker => Push, Scroll to Card => Select .GCODE => Push
Share: Upload model and .STL (but not .GCODE) to http://thingiverse.com/
First time? Ask @tamberg.
Parts'n'Stuff / Private Storage
Lab tools / Wetware
Instructions on how to use the PCB etching facility can be found under PCB Etching.
Instructions for Mask design and print for custom PCBs.
Oven for Reflow and PDMS
There is a temperature sensor in the oven connected to an arduino that can be read through serial terminal. At the moment the sensor is mounted at the wrong position and shows around 40° less than the real temperature in the moddle of the oven. more about the code and connection of the temperature sensor is documented.
Instructions for reflow soldering.
Instructions for PDMS bioelectronix.
Lasercutter for PCB stencils
There's a Library in the OpenLab. Librarything.de login is 'SGMK' combined with our beloved password...