HOME MADE 2020: Difference between revisions
(26 intermediate revisions by 2 users not shown) | |||
Line 8: | Line 8: | ||
==Date== | ==Date== | ||
1.8. - 9.8.2020 | 1.8. - 9.8.2020 | ||
=== HOMEMADE 2020 - Soirée finale aux Fours à Chaux === | |||
'''Samedi, 8. août, 18h - 24h''' | |||
Concerts de sons experimentaux, synthétiseurs élecroniques DIY, prototypes mécatroniques | |||
''La Sociéte Suisse de l'Art Mécatronique ([https://sgmk-ssam.ch/ SGMK-SSAM]) présente une soirée ouverte pour le public dans les Fours à Chaux, Saint-Ursanne'' | |||
Pour le HOME MADE 2020, un summer camp de recherche et rencontres, la SSAM s'est installée à Saint-Ursanne dans le Jura. Les résultats finaux d'une semaine de travail en collaboration, de bricolage, de musique et d'expérimentation seront présentés lors d'une soirée ouverte dans les anciennes Fours à Chaux, un des lieux gérés par L'Assiociation URSINIA. | |||
La SSAM encourage le travail créatif dans les domaines de la mécanique et de l'informatique, ainsi que dans des domaines annexes. Nous comprenons cela comme une expression artistique de l'esprit humain, qui n'est pas principalement caractérisée par son côté pratique, mais par la totalité de la particularité. Une sorte d'ingénierie créative. | |||
Toux ceux qui s'intéressent aux sons expérimentaux, aux synthétiseurs électroniques, a la culture DIY sont invités à nous rejoindre. | |||
* https://sgmk-ssam.ch/ | |||
* https://wiki.sgmk-ssam.ch/index.php?title=HOME_MADE_2020 | |||
audio record of the sound performances: | |||
https://soundcloud.com/simon-berz/home-made-st-ursanne-2020 | |||
==Venue== | ==Venue== | ||
Line 59: | Line 80: | ||
==Workshops== | ==Workshops== | ||
=== | === Tipps & Tricks bei der Mikrofonierung mit Piezos (Kontaktmikrofonen) === | ||
Mo 3.8.20 Piezo PreAmp Workshop | |||
* Praktische Info zu der Thematik mit diversen Testaufbauten. | |||
* In dem Workshop können zudem Kontaktmikrofone, kleine Piezovorstufen und Phantom-Power gespeiste Buffer gebaut werden. | |||
=== KiCad sessions === | |||
Mo 3.8.20 14:00Bassdrum Schaltung zeichnen mit KiCAD | |||
Di 4.8.20 15:00 Bassdrum PCB layout mit KiCAD | |||
Je nach Interesse könnten wir entweder: | |||
* Erfahrungsaustausch zu KiCad-Funktionen machen: Bauteile erstellen, wie macht frau ihre 3D-Modelle, Kniffs und Tricks. | |||
* Oder sonst könnte ich auch eine 101 Einführung anbieten für Neulinge, die mal reinschauen wollen. Einmal durch den Workflow vom Schaltplan zeichnen über die Bauteile zuordnen zum Platinen erstellen. | |||
=== Löthilfen=== | |||
Mo 3.8.20 14:00 Löthilfen bauen | |||
=== | === Origami LED === | ||
Mi 5.8.20 Orgiami LED basteln | |||
=== rainbow trip to the darknet === | |||
Mi 5.8.20 17:00 | |||
* Ein kurzer (sicherer), regenbogenfarbiger Ausblick in die dunkleren Seiten des Internets. | |||
* English or german, hands-on workshop, 2-3h (totally safe and legal) | |||
* USB-Stick and bootable Computer required | |||
=== GNUnet install workshop === | === GNUnet install workshop === | ||
Do 6.8.20 14:30 GnuNet intro | |||
* Most likely: starting with a brief general introductory talk what GNUnet is about (see also: https://gnunet.org ) | * Most likely: starting with a brief general introductory talk what GNUnet is about (see also: https://gnunet.org ) | ||
* Installing GNUnet on participants machines (see also: https://gnunet.org/en/install.html ) | * Installing GNUnet on participants machines (see also: https://gnunet.org/en/install.html ) | ||
Line 76: | Line 119: | ||
* We'd need some GNUnet-exports being remotely available for us, so we'd need to plan a fixed timeslot for this. pls show your interest & timeslots to [[user:sva | sva]], tnx! | * We'd need some GNUnet-exports being remotely available for us, so we'd need to plan a fixed timeslot for this. pls show your interest & timeslots to [[user:sva | sva]], tnx! | ||
=== Theremin von Gaudi Labs Workshop === | |||
Wer Interesse hat bitte melden dann bringt Willi die Sachen mit. Arduino Uno selber organisieren. Wer bauen will kann ja erst mal beginnen und dann zu Hause weiterarbeiten, zB die Antennen biegen, Gehäuse machen etc. | |||
[http://www.gaudi.ch/OpenTheremin/index.php/opentheremin-v3 | OpenTheremin] | |||
=== Digital Self Defense === | === Digital Self Defense === | ||
Line 91: | Line 139: | ||
* Same issue as with the EventHowTo, we ideally should get this going when the pandemic is over... | * Same issue as with the EventHowTo, we ideally should get this going when the pandemic is over... | ||
=== | === New 4093 Bass Synth by FlipFloater === | ||
* SMD | |||
=== MAZI toolkit, local nets === | |||
* For those interested we can play with a local web server, or a MAZI Zone, https://nethood.org/mazi/, hosted on a Raspberry Pi | |||
===PreenFM=== | |||
4 Platinen für den PreenFM sind verschenken, der brauchbare FM Synth kann unterdessen auch CV interpretieren. | |||
Nur Platinen und Support für den DIYer : http://ixox.fr/preenfm2/ | |||
==Talks== | |||
=== | === Tesla 21century === | ||
Mo 3.8.20 new developments for Tesla Coils(Chris) | |||
=== Ätzen mit schnellen Brüter === | |||
Di 15:00 4.8.20 alternative regenerative Ätzchemie (Uwe) | |||
=== | === 7at7 Preparations === | ||
Di 14:00 7a7 intro talk | |||
* | * During the week Panos & sva will prepare some show'n'tell of the ongoing projects & research work to present them (together with you, if you like!) on 7th August, 7 PM | ||
* We will also test various audio/video setups to connect two places with each other: [https://langstrasse200.ch L200] and the HOME MADE, both then also reachable for an Internet audience. | |||
* see more: [[HOME_MADE_2020:7at7|7at7]] | |||
==Program== | ==Program== | ||
=== Usine Condor=== | |||
Mi 5.8.20 | |||
=== Wanderung === | |||
Do 6.8.20 9:00 | |||
Latest revision as of 14:09, 27 December 2020
About
The Homemade summercamp is 1 week of DIY soldering & geeking fun. The participants work on individual or group projects on music, robotics, visuals and other art related topics.
During this participative research week we will do workshops and talks, run experiments, cook & eat together, swim, party and relax
Date
1.8. - 9.8.2020
HOMEMADE 2020 - Soirée finale aux Fours à Chaux
Samedi, 8. août, 18h - 24h
Concerts de sons experimentaux, synthétiseurs élecroniques DIY, prototypes mécatroniques
La Sociéte Suisse de l'Art Mécatronique (SGMK-SSAM) présente une soirée ouverte pour le public dans les Fours à Chaux, Saint-Ursanne
Pour le HOME MADE 2020, un summer camp de recherche et rencontres, la SSAM s'est installée à Saint-Ursanne dans le Jura. Les résultats finaux d'une semaine de travail en collaboration, de bricolage, de musique et d'expérimentation seront présentés lors d'une soirée ouverte dans les anciennes Fours à Chaux, un des lieux gérés par L'Assiociation URSINIA.
La SSAM encourage le travail créatif dans les domaines de la mécanique et de l'informatique, ainsi que dans des domaines annexes. Nous comprenons cela comme une expression artistique de l'esprit humain, qui n'est pas principalement caractérisée par son côté pratique, mais par la totalité de la particularité. Une sorte d'ingénierie créative.
Toux ceux qui s'intéressent aux sons expérimentaux, aux synthétiseurs électroniques, a la culture DIY sont invités à nous rejoindre.
audio record of the sound performances:
https://soundcloud.com/simon-berz/home-made-st-ursanne-2020
Venue
Gruppenhaus Le Chandelier
Chemin de Lorette 1
2882 St. Ursanne
Switzerland
Fee
fee for the whole week
SGMK Members CHF 295.-
non SGMK Members CHF 345.-
daily fee 50.-
the fee includes food, accommodation and basic material
Registration
mail to homemade@sgmk-ssam.ch
Directions
Train from Zurich to Biel or Basel,
change train to Delemont,
in Delemont change to Bus B 614 direction of Delle to St. Ursanne
10 min walk to the House
Slack Community
Please feel welcome to join and ask for free beer at #homemade channel
Flüssigkeitsbedarf sichergestellt
Es wird ein heisser Sommer und auch wenn s Regnet rauchen die Köpfe. Drum werden wir wie letztes Jahr auch tagsüber viel frischen, gekühlten, selbstgebrauten Tee in rauhen Mengen zur Verfügung stellen. Herzlich Willkommen sind somit auch eure Geheimrezepte, (möglichst zuckerfrei, erfrischt besser, nachsüssen geht immer) und Ideen.
Workshops
Tipps & Tricks bei der Mikrofonierung mit Piezos (Kontaktmikrofonen)
Mo 3.8.20 Piezo PreAmp Workshop
- Praktische Info zu der Thematik mit diversen Testaufbauten.
- In dem Workshop können zudem Kontaktmikrofone, kleine Piezovorstufen und Phantom-Power gespeiste Buffer gebaut werden.
KiCad sessions
Mo 3.8.20 14:00Bassdrum Schaltung zeichnen mit KiCAD
Di 4.8.20 15:00 Bassdrum PCB layout mit KiCAD
Je nach Interesse könnten wir entweder:
- Erfahrungsaustausch zu KiCad-Funktionen machen: Bauteile erstellen, wie macht frau ihre 3D-Modelle, Kniffs und Tricks.
- Oder sonst könnte ich auch eine 101 Einführung anbieten für Neulinge, die mal reinschauen wollen. Einmal durch den Workflow vom Schaltplan zeichnen über die Bauteile zuordnen zum Platinen erstellen.
Löthilfen
Mo 3.8.20 14:00 Löthilfen bauen
Origami LED
Mi 5.8.20 Orgiami LED basteln
rainbow trip to the darknet
Mi 5.8.20 17:00
- Ein kurzer (sicherer), regenbogenfarbiger Ausblick in die dunkleren Seiten des Internets.
- English or german, hands-on workshop, 2-3h (totally safe and legal)
- USB-Stick and bootable Computer required
GNUnet install workshop
Do 6.8.20 14:30 GnuNet intro
- Most likely: starting with a brief general introductory talk what GNUnet is about (see also: https://gnunet.org )
- Installing GNUnet on participants machines (see also: https://gnunet.org/en/install.html )
- Depending on the interest and time of the participants we can dive deeper into particular functions and maybe even do some development, be it just on the website/docu side
- We'd need some GNUnet-exports being remotely available for us, so we'd need to plan a fixed timeslot for this. pls show your interest & timeslots to sva, tnx!
Theremin von Gaudi Labs Workshop
Wer Interesse hat bitte melden dann bringt Willi die Sachen mit. Arduino Uno selber organisieren. Wer bauen will kann ja erst mal beginnen und dann zu Hause weiterarbeiten, zB die Antennen biegen, Gehäuse machen etc.
Digital Self Defense
- sva likes to collect all the guides about digital self defense, How-To encrypt communication guides and ALL THE resources out there
- The goal would be to have a commented list of all those, eg with "what languages", "how deep", "user level" and also with direct comments ala "the section about xyz is wonderful, but there are this-and-that problem with the chapter abc" etcpp
How to Create an Event the Open Source Way
- I would like to continue on pretty old work I've done in that topic, it would be awesome if some of the GSMKs event experience could spread in there, too: EventHowTo, esp this file
- I think its now finally crucial to have this done by the "start of the normal" again... many commercial events will have died, so we can grab all those empty spots with events done with and by the heart <3
Radar - a hacker calender
- All info here (maybe use slide mode) and I might get together with https://foss.events folks on this... here I'd need programming skills next anyhow so cant really re-start myself too much...
- Same issue as with the EventHowTo, we ideally should get this going when the pandemic is over...
New 4093 Bass Synth by FlipFloater
- SMD
MAZI toolkit, local nets
- For those interested we can play with a local web server, or a MAZI Zone, https://nethood.org/mazi/, hosted on a Raspberry Pi
PreenFM
4 Platinen für den PreenFM sind verschenken, der brauchbare FM Synth kann unterdessen auch CV interpretieren. Nur Platinen und Support für den DIYer : http://ixox.fr/preenfm2/
Talks
Tesla 21century
Mo 3.8.20 new developments for Tesla Coils(Chris)
Ätzen mit schnellen Brüter
Di 15:00 4.8.20 alternative regenerative Ätzchemie (Uwe)
7at7 Preparations
Di 14:00 7a7 intro talk
- During the week Panos & sva will prepare some show'n'tell of the ongoing projects & research work to present them (together with you, if you like!) on 7th August, 7 PM
- We will also test various audio/video setups to connect two places with each other: L200 and the HOME MADE, both then also reachable for an Internet audience.
- see more: 7at7
Program
Usine Condor
Mi 5.8.20
Wanderung
Do 6.8.20 9:00
Ideas for local visits
- former bicycle factory condor
- damassine-distillerie
- stamm studio Porrentruy http://archives.stammstudio.com/index.php/en/
your idea
Kinderprogramm
Children are welcome
7th August, 7 PM
show'n'tell your best experiences and findings from HOME MADE! See more: 7at7
8th August, Closing Party
Let's discuss doing a closing event of our week
Participants
Contact Persons
Oliver Jaeggi: Organisation, SGMK core team