Ender3 v2

Revision as of 17:44, 24 July 2021 by Dusjagr (Talk | contribs)

Jump to: navigation, search

We got a new printer!!

Ender3 MechArtLab.jpg

Slice yourself using CURA

  • install Cura 4.0.xx (newsest version)
  • Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size)
  • Start with the pre-made settings or use dusjagr's "optimized" curaprofiles for draft (0.2mm) or fine (0.1mm)


MachineSettings Ender3.png

Print from microSD card

That's kinda the easiest and sofar gave me the best results.

Connect via OctoPrint

Installed on OctoPrint. try this: http://octopi.local/ or:

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).

Choose Port:

  • /dev/ttyUSB0 for Ender3
  • /dev/ttyACM0 for MicroDelta aka RandeDelta

Choose Profile:

  • Neue Ender Siech im MechArtLab
  • RandeDelta


upload gcode

  • Upload your gcode
  • Start to Print!!!

To Do:

  • Upload to SD card notworking
  • Multiple printers on OctoPi
  • add LEDs!!

Slice on OctoPrint (experimental)

used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk

it's kinda working with the cura settings. but print quality not so good still....

Ender3 OctoPrintSlicing.jpg