Ender3 v2: Difference between revisions
Jump to navigation
Jump to search
No edit summary |
No edit summary |
||
Line 1: | Line 1: | ||
We got a new printer!! | We got a new printer!! | ||
[[File:Ender3_v2.jpg|thumb|400px]] | |||
[[File: | |||
== Slice yourself using CURA == | == Slice yourself using CURA == | ||
* install Cura 4. | * install Cura 4.10.xx (newest version) | ||
* Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size) | * Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size) | ||
* Start with the pre-made settings or use dusjagr's "optimized" curaprofiles for draft (0.2mm) or fine (0. | * Start with the pre-made settings or use dusjagr's "optimized" curaprofiles for draft (0.2mm) or fine (0.12mm) | ||
[[:File:Ender3-CuraProfiles.zip]] | [[:File:Ender3-CuraProfiles.zip]] | ||
[[File: | [[File:CuraSetting_ender3V2.jpg|600px]] | ||
== Print from microSD card == | == Print from microSD card == |
Revision as of 20:00, 24 July 2021
We got a new printer!!
Slice yourself using CURA
- install Cura 4.10.xx (newest version)
- Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size)
- Start with the pre-made settings or use dusjagr's "optimized" curaprofiles for draft (0.2mm) or fine (0.12mm)
Print from microSD card
That's kinda the easiest and sofar gave me the best results.
Connect via OctoPrint
Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).
Choose Port:
- /dev/ttyUSB0 for Ender3
- /dev/ttyACM0 for MicroDelta aka RandeDelta
Choose Profile:
- Neue Ender Siech im MechArtLab
- RandeDelta
Connect
upload gcode
- Upload your gcode
- Start to Print!!!
To Do:
- Upload to SD card notworking
- Multiple printers on OctoPi
- add LEDs!!
Slice on OctoPrint (experimental)
used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk
it's kinda working with the cura settings. but print quality not so good still....