Revision as of 10:51, 11 April 2019 by Dusjagr (Talk | contribs) (Slice yourself using CURA)

Jump to: navigation, search

Slice yourself using CURA

  • install Cura 4.0.xx (newsest version)
  • Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size)
  • Start with the pre-made settings or use my own "optimized" curaprofiles


Print from microSD card

Connect via OctoPrint

Installed on OctoPrint. try this: http://octopi.local/ or:

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).

Choose Port:

  • /dev/ttyUSB0 for Ender3
  • /dev/ttyACM0 for MicroDelta aka RandeDelta

Choose Profile:

  • Neue Ender Siech im MechArtLab
  • RandeDelta


upload gcode

To Do:

Upload to SD card notworking

Slice on OctoPrint (experimental)

used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk

it's kinda working with the cura settings. but print quality not so good still....