Difference between revisions of "Ender3"

From SGMK-SSAM-WIKI
Jump to: navigation, search
(Connect via OctoPrint)
Line 27: Line 27:
  
 
=== Slice on OctoPrint (experimental) ===
 
=== Slice on OctoPrint (experimental) ===
 +
 +
used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk
 +
 +
it's kinda working with the cura settings. but print quality not so good still....

Revision as of 11:33, 11 April 2019

Slice yourself using CURA

Print from microSD card

Connect via OctoPrint

Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/

Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).

Choose Port:

  • /dev/ttyUSB0 for Ender3
  • /dev/ttyACM0 for MicroDelta aka RandeDelta

Choose Profile:

  • Neue Ender Siech im MechArtLab
  • RandeDelta

Connect

upload gcode

To Do:

Upload to SD card notworking

Slice on OctoPrint (experimental)

used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk

it's kinda working with the cura settings. but print quality not so good still....