Ender3: Difference between revisions
Jump to navigation
Jump to search
Line 6: | Line 6: | ||
[[:File:Ender3-CuraProfiles.zip]] | [[:File:Ender3-CuraProfiles.zip]] | ||
[[File:MachineSettings_Ender3.png|600px]] | |||
== Print from microSD card == | == Print from microSD card == |
Revision as of 10:55, 11 April 2019
Slice yourself using CURA
- install Cura 4.0.xx (newsest version)
- Add "New Printer" and choose Ender3 (in older version just choose any rectangular and edit the print size)
- Start with the pre-made settings or use my own "optimized" curaprofiles
Print from microSD card
Connect via OctoPrint
Installed on OctoPrint. try this: http://octopi.local/ or: http://192.168.1.38/
Login with: mechartlab / MECHARTLAB WIFI KEY (check on whiteboard).
Choose Port:
- /dev/ttyUSB0 for Ender3
- /dev/ttyACM0 for MicroDelta aka RandeDelta
Choose Profile:
- Neue Ender Siech im MechArtLab
- RandeDelta
Connect
upload gcode
To Do:
Upload to SD card notworking
Slice on OctoPrint (experimental)
used this instruction: https://www.youtube.com/watch?v=0I_BIR36Grk
it's kinda working with the cura settings. but print quality not so good still....