WatchOut! - DIY-Synthesizer
From SGMK-SSAM-WIKI
Contents |
about
The WatchOut!-Synthesizer makes sound due to a program on an attiny13-chip!
Dependent on the light intensity, a solarpanel reads this program and gives the
power for the sound production. The more light shines on the cell, the higher and
louder the pitch.
There are different programs which defines the function of the two buttons.
Because of the inconstant power-source the processing of attiny13 is very
unstable, which actually gives us nice sounds!
http://wiki.sgmk-ssam.ch/index.php/I
http://wiki.sgmk-ssam.ch/index.php/II
http://wiki.sgmk-ssam.ch/index.php/Three
equipment
You can upload a new code with the following tools:
Hardware:
USB Programmer: http://www.ladyada.net/make/usbtinyisp/
buy USB Programmer: http://www.adafruit.com/products/46
ATtiny13 Connector: [[1]]
Software Tools:
Windows: CommandLine
Mac: Terminal, avrdude http://www.ladyada.net/learn/avr/avrdude.html
Or:
Arduino: http://arduino.cc/en/Tutorial/ArduinoISP
Breadboard
code
code is coming soon
electronics
1 PCB 1 100uF Capacitor 1 ATtiny13 with socket 1 Solarpanel 2 Buttons 1 Minijack socket 1 Piezo loudspeaker Wire (for solarpanel)
non-electronic material
2 M4 Screws 2 M4 Nuts 1 Acrylic deck 1 Acrylic base with 1 Wristband
laserfiles coming soon
how to
Keep attention by removing the chip, to not break the legs. If you need help in anything please contact us: labor(at)laborluzern.org
links
http://www.youtube.com/watch?v=k94ccUMakCU&feature=player_embedded
http://luzern.fablab.ch/bau-dir-einen-synthi-furs-handgelenk
http://www.thingiverse.com/thing:37478
