MechArtLab Infrastructure
From SGMK-SSAM-WIKI
Contents |
Electronic Tools
Hardware Tools
Parts'n'Stuff / Private Storage
Lab tools / Wetware
PCB Etching
Instructions on how to use the PCB etching facility can be found under PCB Etching.
Instructions for Mask design and print for custom PCBs.
Oven for Reflow and PDMS
There is a temperature sensor in the oven connected to an arduino that can be read through serial terminal. At the moment the sensor is mounted at the wrong position and shows around 40° less than the real temperature in the moddle of the oven. more about the code and connection of the temperature sensor is documented.
Instructions for reflow soldering.
Instructions for PDMS bioelectronix.
Library
There's a Library in the OpenLab. Please ask TomasPospisek for write access.
Office / Public Station
Chill out / Coffee
